复杂地质矿山深部巷道U型钢支护优化

doi:10.16265/j.cnki.issn1003-3033.2018.12.016

中国安全科学学报 ›› 2018, Vol. 28 ›› Issue (12): 96-101.doi: 10.16265/j.cnki.issn1003-3033.2018.12.016

复杂地质矿山深部巷道U型钢支护优化

王剑¹, 左宇军^**1,2 教授, 董陇军³ 教授, 王浩¹, 刘怀谦¹

1 贵州大学矿业学院,贵州贵阳 550025
2 复杂地质矿山开采安全技术工程中心,贵州贵阳 550025
3 中南大学资源与安全工程学院,湖南长沙 410083

收稿日期:2018-09-23 修回日期:2018-11-12 发布日期:2020-11-25
作者简介:王剑 (1991—),男,广西柳州人,硕士研究生,研究方向为矿山支护和微震监测。E-mail:gzu_wj@qq.com。
基金资助:
国家自然科学基金资助(51574093,51774101);贵州省高层次创新型人才培养项目(黔科合人才(2016)4011号)。

Research on optimization of U-shaped steel support for deep roadway in complex geological mine

WANG Jian¹, ZUO Yujun^1,2, DONG Longjun³, WANG Hao¹, LIU Huaiqian¹

1 Mining College, Guizhou University, Guiyang Guizhou 550025, China
2 Engineering Center for Safe Mining Technology Under Complex Geologic Condition, Guiyang Guizhou 550025, China
3 School of Resources and Safety Engineering, Central South University, Changsha Hunan 410083, China

Received:2018-09-23 Revised:2018-11-12 Published:2020-11-25

摘要/Abstract

摘要： 为分析深部复杂地质巷道U型钢支护的优化问题,以山东某矿-550中段为工程背景,利用ANSYS有限元法,建立深部巷道支护力学三维模型,分析深部巷道围岩稳定性;运用正交试验法对U型钢支护间距、侧应力系数和监测点影响因子进行正交试验;结合现场爆破测振试验,验证数值模拟及正交试验的有效性。研究结果表明:当侧应力系数小于等于1时,垂直应力起主导作用;U型钢支护的最佳间距为1 m,可满足IV级围岩稳定性要求。

关键词: 正交试验法, 复杂地质深部巷道, U型钢, 支护优化, 爆破振动

Abstract: To analyze the optimization problem of U-shaped steel support for deep complex geological roadway, the middle section of -550 in a certain mine in Shandong province was taken as engineering background, a three-dimensional model of deep roadway supporting mechanics was built by using ANSYS finite element method, and the stability of deep roadway surrounding rock was analyzed. The orthogonal test method is used to carry out the orthogonal test on three influencing factors, such as the support spacing of U-shaped steel, lateral stress coefficient and monitoring point. The validity of numerical simulation and orthogonal test was verified by a field blasting seismic test. The results show that when the lateral stress coefficient is less than or equal to 1, the vertical stress plays a dominant role, and that the optimum spacing of U-shaped steel support is 1 m, which can meet the stability requirement of IV class surrounding rock.

Key words: orthogonal method, deep roadway of complex geological mine, U-shaped steel, support optimization, blasting vibration

中图分类号:

X936

王剑, 左宇军, 董陇军, 王浩, 刘怀谦. 复杂地质矿山深部巷道U型钢支护优化[J]. 中国安全科学学报, 2018, 28(12): 96-101.

WANG Jian, ZUO Yujun, DONG Longjun, WANG Hao, LIU Huaiqian. Research on optimization of U-shaped steel support for deep roadway in complex geological mine[J]. China Safety Science Journal, 2018, 28(12): 96-101.

参考文献

[1] 刘特洪, 林天健. 软岩工程设计理论与施工实践[M]. 北京:中国建筑工业出版社, 2001: 1-20.
[2] 何满潮. 深部软岩工程的研究进展与挑战[J]. 煤炭学报, 2014, 39(8): 1 409-1 417.
HE Manchao. Progress and challenges of soft rock engineering in depth[J]. Journal of China Coal Society, 2014, 39(8): 1 409-1 417.
[3] 康红普, 王金华, 林健. 高预应力强力支护系统及其在深部巷道中的应用[J]. 煤炭学报, 2007, 32(12): 1 233-1 238.
KANG Hongpu, WANG Jinhua, LIN Jian. High pretensioned stress and intensive bolting system and its application in deep roadways[J]. Journal of China Coal Society, 2007, 32(12): 1 233-1 238.
[4] MALMGREN L, NORDLUND E, ROLUND S. Adhesion strength and shrinkage of shotcrete[J]. Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, 2005, 20(1): 33-48.
[5] MALMGREN L, NORDLUND E. Interaction of shotcrete with rock and rock bolts: a numerical study[J]. International Journal of Rock Mechanics & Mining Sciences, 2008, 45(4): 538-553.
[6] DHARMA R B, TAN K H. Rotational capacity of steel I-beams under fire conditions part II: numerical simulations[J]. Engineering Structures, 2007, 29(9): 2 403-2 418.
[7] ZHOU Wangbao, LI Shujin, HUANG Zhi, et al. Distortional buckling of I-steel concrete composite beams in negative moment area[J]. Steel & Composite Structures, 2016, 20(1): 57-70.
[8] CAO Rihong, CAO Ping, LIN Hang. Support technology of deep roadway under high stress and its application[J]. International Journal of Mining Science and Technology, 2016, 26(5): 787-793.
[9] KANG Hongpu, WANG Jinhua, LIN Jian. Reinforcement technique and its application in complicated roadways in underground coal mines[J]. Journal of Engineering Materials & Technology, 2011, 117(3): 255-259.
[10] LIU Jianzhuang, ZHANG Nong, ZHENG Xigui, et al. Research on buckling failure mechanism of U type steel support loaded deviating longitudinally[J]. Journal of China Coal Society, 2011, 36(10): 1 647-1 652.
[11] JIAO Yuyong, SONG Liang, WANG Xinzhi, et al. Improvement of the U-shaped steel sets for supporting the roadways in loose thick coal seam[J]. International Journal of Rock Mechanics & Mining Sciences, 2013, 60(2): 19-25.
[12] 马振乾, 姜耀东, 吴桂义,等. 厚层泥质顶板巷道支护难度分级研究与应[J]. 中国安全科学学报, 2017, 27(11): 121-125.
MA Zhenqian, JIANG Yaodong, WU Guiyi, et al. Research on support difficulty classification for roadways with thick mudstone roof and its application[J]. China Safety Science Journal, 2017, 27(11): 121-125.
[13] 程治华. 正交试验法在矿石预选试验中的应用[J]. 矿业研究与开发, 2004, 24(6): 43-45.
CHENG Zhihua. Application of orthogonal experimental method in the precedent experiment of mineral concentration[J]. Mining Research and Development, 2004, 24(6): 43-45.
[14] 吴刚, 张义平, 曾照凯. 正交试验法优化胶结充填体强度参数设计[J]. 矿业工程, 2010, 8(3): 24-26.
WU Gang, ZHANG Yiping, ZENG Zhaokai. Optimization of strength parameters of consolidated backfill body by means of orthogonal experimental method[J]. Mining Engineering, 2010, 8(3): 24-26.
[15] 黄亚楠, 陈连军, 于欣, 等. 基于正交试验泵送湿喷混凝土润管剂配制研究[J]. 矿业研究与开发, 2017(1): 36-39.
HUANG Ya'nan, CHEN Lianjun, YU Xin, et al. Study on preparation of wet spray concrete pipe runner based on orthogonal test[J]. Mining Research and Development, 2017(1): 36-39.
[16] 苏静, 吴桂义, 张义平.等. 扇形垂直中深孔爆破参数选取的正交试验研究[J]. 矿业研究与开发, 2012(4): 100-101.
SU Jing, WU Guiyi, ZHANG Yiping, et al. Study on parameters selection of vertical fan-shaped medium-length hole blasting by orthogonal experiment[J]. Mining Research and Development, 2012(4): 100-101.
[17] 廖文景, 徐必根, 唐绍辉. 石膏矿采空区稳定性主要影响因素正交试验研究[J]. 矿业研究与开发, 2011(6): 14-17.
LIAO Wenjing, XU Bigen, TANG Shaohui. Orthogonal experiment analysis on influence factors to stability of mined-out area in gypsum mine[J]. Mining Research and Development, 2011(6): 14-17.
[18] 马生徽, 王文杰, 马雄忠. 基于正交数值试验的玻璃钢锚杆支护参数优化研究[J]. 矿业研究与开发, 2013(2): 46-48.
MA Shenghui, WANG Wenjie, MA Xiongzhong. Research on optimization of support parameters for GFRP anchor based on normal numerical test[J]. Mining Research and Development, 2013(2): 46-48.
[19] 马振乾, 姜耀东, 左宇军,等. 特厚泥质顶板巷道锚杆支护关键参数识别与应用[J]. 中国安全科学学报, 2017, 27(7): 121-126.
MA Zhenqian, JIANG Yaodong, ZUO Yujun, et al. Identification and application of key parameters of bolt support for roadways with extra-thick mudstone roof[J]. China Safety Science Journal, 2017, 27(7): 121-126.
[20] GB 6722—2014, 爆破安全规程[S].GB 6722-2014, Safety regulations for blasting[S].

复杂地质矿山深部巷道U型钢支护优化

Research on optimization of U-shaped steel support for deep roadway in complex geological mine

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价

[1]	付晓强, 俞缙. 隧道爆破信号交叉项抑制及雷管延期时间研究^*[J]. 中国安全科学学报, 2021, 31(12): 53-61.
[2]	郭嘉赫, 戚绪尧, 王栋, 朱国庆, 陈良舟. 磨料水射流切割影响因素及切割深度预测模型[J]. 中国安全科学学报, 2020, 30(1): 101-106.
[3]	曹兰柱, 王珍, 王东. 边坡受爆破振动损伤及其稳定性分析[J]. 中国安全科学学报, 2018, 28(2): 75-80.
[4]	褚怀保, 吴礼报, 杨小林, 叶红宇, 李栓杰, 赵禹. 新浇混凝土爆破振动损伤累积机制试验研究[J]. 中国安全科学学报, 2017, 27(9): 69-73.
[5]	温廷新教授, 陈晓宇, 刘天宇, 刘旭. 基于优化IGA-ELM模型的爆破振动特征参量预测研究[J]. 中国安全科学学报, 2017, 27(11): 37-42.
[6]	邵良杉，李永利，赵琳琳. 露天采矿爆破振动对民房破坏的SVM预测模型[J]. 中国安全科学学报, 2013, 23(9): 26-.
[7]	邵良杉，赵琳琳. 露天采矿爆破振动对民房破坏的旋转森林预测模型[J]. 中国安全科学学报, 2013, 23(2): 58-.
[8]	杨珊，陈建宏，郭宏斌，罗正. 隧道爆破振动影响因素的灰色关联分析[J]. 中国安全科学学报, 2011, 21(6): 65-.
[9]	杨珊，陈建宏，郭宏斌，罗正. 基于回归分析的隧道爆破振动传播规律研究[J]. 中国安全科学学报, 2011, 21(10): 71-.
[10]	唐海，林大能，陈文昭. 某铅锌矿爆破有害效应分析及安全评估[J]. 中国安全科学学报, 2008, 18(9): 93-.
[11]	尹志政，张家生，阳生权. 厦门云顶隧道爆破监测与分析[J]. 中国安全科学学报, 2005, 15(9): 109-.