中国安全科学学报 ›› 2020, Vol. 30 ›› Issue (6): 98-105.doi: 10.16265/j.cnki.issn1003-3033.2020.06.015

• 安全工程技术 • 上一篇    下一篇

松散煤体内液态二氧化碳相变换热试验研究

于志金1,2 讲师, 杨淞1, 谷雨1, 邓军1,2 教授   

  1. 1.西安科技大学 安全科学与工程学院,陕西 西安 710054;
    2.西安科技大学 矿业工程博士后科研流动站,陕西 西安 710054
  • 收稿日期:2020-03-16 修回日期:2020-05-09 出版日期:2020-06-28 发布日期:2021-01-28
  • 作者简介:于志金(1989—),男,黑龙江双鸭山人,博士,讲师,硕士生导师,从事煤矿过程安全方面的研究。E-mail:yuzhijin0927@126.com。
  • 基金资助:
    国家自然科学基金青年基金资助(51804245);陕西省教育厅科研计划项目(18JK0515)

Experimental investigation on phase transition and heat transfer characteristics for liquid carbon dioxide in loose coal

YU Zhijin1,2, YANG Song1, GU Yu1, DENG Jun1,2   

  1. 1. School of Safety Science and Engineering, Xi'an University of Science and Technology, Xi'an Shaanxi, 710054, China;
    2. Mining Engineering Post-Doctoral Research Station, Xi'an University of Science and Technology, Xi'an Shaanxi 710054, China
  • Received:2020-03-16 Revised:2020-05-09 Online:2020-06-28 Published:2021-01-28

摘要: 为研究液态二氧化碳(LCO2)在松散煤体内泄放过程的传热特征以及LCO2压注参数对煤体温度场的影响,利用自制试验平台开展松散煤体内压注LCO2过程试验,分析压注过程煤体温度的变化、压注控制参数对致冷范围的影响。结果表明:LCO2压入松散煤体后瞬间发生相变,与煤体发生剧烈热量交换,并形成低于CO2三相点温度(-56.6 ℃)的相变致冷区域;沿射流方向,相变致冷范围随压注时间增加呈对数增长;增大压注流量、泄放口径和入口压力,相变致冷范围分别呈指数、对数、线性函数增大。

关键词: 松散煤体, 液态二氧化碳(LCO2), 传热特征, 压注参数, 致冷范围

Abstract: In order to investigate heat transfer characteristics of LCO2 injected in loose coal and study influence of injection parameters on temperature field of coal, experiments on LCO2 injection process were carried out by using self-made test platform. Then, temperature changes of coal and influence of injection parameters on refrigeration range were analyzed. The results show that when LCO2 is injected into loose coal, phase transition occurs immediately, and an intensive heat transfer process starts and forms a phase-change cooling area (<-56.6 ℃) which sees a logarithm increase over injection time in direction of CO2 jet. Meanwhile, the cooling area increases in a form of exponential, logarithm and linear function respectively along with increase of injection flow, caliber and pressure

Key words: loose coal, liquid carbon dioxide (LCO2), heat transfer characteristic, injection parameter, cooling area

中图分类号: