China Safety Science Journal ›› 2017, Vol. 27 ›› Issue (12): 91-96.doi: 10.16265/j.cnki.issn1003-3033.2017.12.016

• Safety Science of Engineering and Technology • Previous Articles     Next Articles

Study on applicability of different desorption formulas to briquette containing methane

YUE Jiwei1, WANG Zhaofeng1,2   

  1. 1School of Safety Science and Engineering, Henan Polytechnic University, Jiaozuo Henan 454000,China
    2MOE Engineering Center of Mine Disaster Prevention and Rescue, Jiaozuo Henan 454000, China
  • Received:2017-08-15 Revised:2017-10-23 Online:2017-12-28 Published:2020-10-10

Abstract: In order to accurately calculate the loss of coal core methane in the process of core extraction, reduce the frequency of coal and gas outburst and the number of casualties, relationship curves between cumulative methane desorption quantity of the former 60 minutes and time were drew based on the data obtained from experiments carried out by using a high and low temperature test device. The authors tried to fit the curves with different desorption formulas.The results show that the type of Ustinov could not be completely 0 ℃ above the desorption data and could fit the data on desorption below 0 ℃, that the fitting effect of K.Winter type is better than that of WANG Youan type or that of SUN Chongxu type, and that fitting effects of R.M. Barrell type, exponential type and B.A. Bolt type are poor, and that WANG Youan type, K.Winter type and SUN Chongxu type are applicable to briquette coal samples containing methane regardless of the temperature they are at.

Key words: desorption quantity, high and low temperature, desorption formula, briquette coal, applicability

CLC Number: