[1] ZHAO Tong, LIU Changyou, YETILMEZSOY K, et al. Segmental adjustment of hydraulic support setting load in hard and thick coal wall weakening: a study of numerical simulation and field measurement[J]. Journal of Geophysics and Engineering, 2018,15(6):2 481-2 491. [2] WANG Fangtian, DUAN Chaohua, TU Shihao, et al. Hydraulic support crushed mechanism for the shallow seam mining face under the roadway pillars of room mining goaf[J]. International Journal of Mining Science and Technology, 2017,27(5):853-860. [3] PYTLIK A. Process characteristics of hydraulic legs equipped with safety valves at dynamic load caused by a mining tremor[J]. Archives of Mining Sciences, 2015,60(2):595-612. [4] 丁飞, 王谦. 液压支架结构疲劳动态可靠性评估方法[J]. 中国安全科学学报, 2015,25(6):86-90. DING Fei, WANG Qian. Fatigue dynamic reliability assessment method of hydraulic support structure[J]. China Safety Science Journal, 2015,25(6):86-90. [5] 王慧, 赵国超, 宋宇宁, 等. 基于改进的威布尔分布的液压支架可靠性评估方法[J]. 中国安全科学学报, 2018,28(5):99-104. WANG Hui, ZHAO Guochao, SONG Yuning, et al. Reliability evaluation method of hydraulic support based on improved Weibull distribution[J]. China Safety Science Journal, 2018,28(5):99-104. [6] BOUTRID A, DJOUAMAA M C, CHRTTIBI M, et al. Design of a model powered support system in Kenadsa mine (Algeria)[J]. Journal of Mining Science, 2016,52(1):78-86. [7] 张金虎, 王国法, 杨正凯, 等. 高韧性较薄直接顶特厚煤层四柱综放支架适应性和优化研究[J]. 采矿与安全工程学报, 2018, 35(6):1 164-1 169,1 176. ZHANG Jinhu, WANG Guofa, YANG Zhengkai, et al. Adaptability analysis and optimization study of four-leg shield caving support in ultra thick seam with high toughness and thinner immediate roof[J]. Journal of Mining & Safety Engineering, 2018,35 (6):1 164-1 169,1 176. [8] 姚庆. 研究煤矿液压支架安全阀存在的问题及改进措施[J]. 当代化工研究, 2019(16):56-57. YAO Qing. Study the existing problems and improvement measures of hydraulic support safety valve in coal mine[J]. Modern Chemical Research, 2019(16):56-57. [9] 卢宁. 液压支架大流量安全阀冲击特性仿真分析[J]. 机械工程师, 2015(12):27-29. LU Ning. Shock characteristics simulation and analysis of large flow safety valve for hydraulic support[J]. Mechanical Engineer, 2015(12):27-29. [10] 周如林. 矿用安全阀自动装卡检测系统设计[J]. 煤矿机械, 2019,40(7):21-23. ZHOU Rulin. Design of automatic chucking systems of safety valve for hydraulic support[J]. Coal Mine Machinery, 2019,40 (7):21-23. [11] 金焕成. 液压支架用大流量安全阀及试验系统设计[J]. 科技创新导报, 2016,13(27):75-76. [12] DAI Kaiyu, XIE Fangwei, GAO Qingsong, et al. Theoretical and experimental research on the pressure response characteristics of cartridge electromagnetic relief valve[J]. International Journal of Structural Integrity, 2018,9(1):65-75. [13] 杨国来, 李新峰, 焦喜娟, 等. 液压支架用大流量安全阀的阀芯结构改进及流场仿真分析[J]. 液压气动与密封, 2019,39(3): 9-12. YANG Guolai, LI Xinfeng, JIAO Xijuan, et al. Flow field simulation analysis and spool structure improvement of large-flow relief valve for hydraulic support[J]. Hydraulics Pneumatics & Seals, 2019,39(3):9-12. [14] 郭永昌, 廉自生, 袁红兵, 等. 液压支架用大流量安全阀性能分析[J]. 液压与气动, 2019(1):71-74. GUO Yongchang, LIAN Zisheng, YUAN Hongbing, et al. Performance analysis of large flow safety valve for powered support [J]. Chinese Hydraulics & Pneumatics, 2019(1):71-74. [15] 韩凤霞. CFD在液压支架安全阀阀芯设计中应用[J]. 煤矿机械, 2014,35(10):218-220. HAN Fengxia. Application of CFD in safety valve spool design of hydraulic support[J]. Coal Mine Machinery, 2014,35(10):218-220. [16] ZHAO Jiyun, LIU Lei. Influence of reversing impact load on performance of a two-step unloading pilot-operated check valves[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018,40(6):1-10. |