中国安全科学学报 ›› 2020, Vol. 30 ›› Issue (6): 71-77.doi: 10.16265/j.cnki.issn1003-3033.2020.06.011

• 安全工程技术 • 上一篇    下一篇

厚煤层综采工作面空巷综合治理技术

张耀辉1,2 讲师, 李西凡3, 熊祖强3 教授, 王成3 副教授   

  1. 1.河南工业和信息化职业学院 资源环境系,河南 焦作 454003;
    2.成都理工大学 地质灾害防治与地质环境保护国家重点实验室,四川 成都 610059;
    3.河南理工大学 能源科学与工程学院,河南 焦作454003
  • 收稿日期:2020-03-11 修回日期:2020-05-07 出版日期:2020-06-28 发布日期:2021-01-28
  • 作者简介:张耀辉(1985—),男,河南上蔡人,博士,讲师,主要从事注浆材料、高水和超高水充填材料的研发及应用工作。E-mail:496276806@qq.com。
  • 基金资助:
    河南省高等职业学校青年骨干教师培养计划; 河南省重点研发与推广专项(科技攻关)支持项目。

Comprehensive governance technology for fully-mechanized mining face across abandoned roadways in thick coal seam

ZHANG Yaohui1,2, LI Xifan3, XIONG Zuqiang3, WANG Cheng3   

  1. 1. Department of Resources and Environment, Henan College of Industry and Information, Jiaozuo Henan 454003, China;
    2. State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu Sichuan 610059, China;
    3. School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo Henan 454003, China
  • Received:2020-03-11 Revised:2020-05-07 Online:2020-06-28 Published:2021-01-28

摘要: 为解决厚煤层开采过程中出现的多种类型空巷影响工作面正常回采等问题,采用现场调研、理论分析等方法归纳空巷的赋存特点和危害,将其划分为沿底完整型、沿顶完整型和垮落型等空巷,并针对不同空巷类型提出不同的治理方法;同时为满足不同施工方案的需要,研发一种硫铝酸盐基多性能注浆材料,进而提出厚煤层综采工作面过空巷综合治理技术;最后分别采用充填支柱支撑、高水充填和深孔注浆的方法对寺河煤矿、成庄煤矿和郭庄煤矿进行空巷治理,并考察治理效果。结果表明:有针对性地治理空巷后,在工作面过空巷期间未发生片帮、冒顶事故,顶板来压正常,保证工作面的安全回采。

关键词: 厚煤层开采, 过空巷, 泵送支柱, 高水速凝材料, 注浆加固

Abstract: In order to address impacts of various types of abandoned roadways on normal mining of working face in thick coal seam, field surveys, theoretical analysis and other methods were used to summarize occurrence characteristics and hazards of abandoned roadways which were divided into complete types along bottom, complete types along top, and fallen ones, and different treatment methods for them were proposed. Meanwhile, in order to meet needs of various construction schemes, sulfoaluminate-based multifunctional grouting materials were developed, and comprehensive governance technology for fully-mechanized mining face passing abandoned roadways in thick coal seam was proposed. Finally, with Sihe coal mine, Chengzhuang coal mine and Guozhuang coal mine taken as engineering backgrounds, filling pillar support, high water filling and deep-hole grouting methods were applied respectively to treat abandoned roadways, and their governance effectiveness was investigated. The results show that after specific treatment of empty roadways, there will be no sloughing and roof accidents, and roof pressure becomes normal, thus ensuring safe mining of working faces.

Key words: thick coal seam mining, abandoned roadway, pumping pillars, high water quick-setting material, grouting reinforcement

中图分类号: