中国安全科学学报 ›› 2026, Vol. 36 ›› Issue (8): 55-64.doi: 10.16265/j.cnki.issn1003-3033.2026.08.1863

• 安全技术与工程 • 上一篇    下一篇

基于多尺度残差卷积神经网络的矿山微震识别

陈晓红1,2(), 蔡诚成1,2, 刘晓亮1,2, 安庆贤1,**()   

  1. 1 中南大学 商学院, 湖南 长沙 410083
    2 湘江实验室, 湖南 长沙 410205
  • 收稿日期:2026-03-10 修回日期:2026-05-12 出版日期:2026-08-28
  • 通信作者:
    **安庆贤(1988—),男,安徽蚌埠人,博士,教授,主要从事机器学习、安全及环境科学等方面的研究。E-mail:
  • 作者简介:

    陈晓红 (1963—),女,湖南长沙人,博士,教授,博士生导师,中国工程院院士,主要从事智能科学与工程管理、资源环境管理等方面的研究。E-mail:

  • 基金资助:
    国家自然科学基金卓越研究群体资助(72088101); 湘江实验室重大项目(24XJJCYJ01005); 中国工程院战略研究与咨询项目(2023-JB-09); 中南大学研究生自主探索创新项目(2025ZZTS0421)

Mine microseismic identification based on multi-scale residual convolutional neural network

Chen Xiaohong1,2(), Cai Chengcheng1,2, Liu Xiaoliang1,2, An Qingxian1,**()   

  1. 1 School of Business, Central South University, Changsha Hunan 410083, China
    2 Xiangjiang Laboratory, Changsha Hunan 410205, China
  • Received:2026-03-10 Revised:2026-05-12 Published:2026-08-28

摘要:

为解决矿山微震波形分类中传统算法模型识别准确性低、泛化性差及部署成本高的问题,针对微震波形时频结构复杂、尺度变化显著等特征,设计一种融合多尺度卷积与残差连接的多尺度残差卷积神经网络(MSRCNN),利用多尺度卷积捕获微震波形的局部细节与全局趋势,并通过残差连接增强深层特征传递与梯度稳定性;将MSRCNN与双向长短期记忆网络(BiLSTM)及自注意力机制相结合,构建MSRCNN-BiLSTM-Attention模型,采用交叉熵和有监督对比学习的加权损失函数优化训练,并在多个矿山微震监测工程数据中验证。结果表明:所构模型在准确率、召回率及精确率方面均显著优于传统图像识别模型,且在不同矿山的迁移测试中保持较高精度,鲁棒性与泛化能力较好;MSRCNN模块是模型性能的核心来源,其单独使用即可达到接近完整模型的识别精度,且参数量较少,适合部署于算力受限的矿山实时监测系统;完整模型参数量较高,但识别性能最优,更适用于深部高应力区域、冲击地压易发区及微震触发频繁的高安全风险场景,可为微震预警提供更可靠的识别能力。

关键词: 多尺度残差卷积神经网络(MSRCNN), 矿山微震, 图像识别, 双向长短期记忆网络(BiLSTM), 自注意力机制

Abstract:

To address the problems of low recognition accuracy, poor generalization, and high deployment cost in traditional algorithms for mine microseismic waveform classification, a multi-scale residual convolutional neural network (MSRCNN) was designed for the complex time-frequency structures and significant scale variations of microseismic waveforms. Multi-scale convolutions were used to capture local details and global trends of microseismic waveforms. Residual connections were introduced to enhance deep feature transmission and gradient stability. The MSRCNN was conmbined with a bidirectional long short-term memory network (BiLSTM) and a self-attention mechanism to construct the MSRCNN-BiLSTM-Attention model. A weighted loss function combining cross-entropy loss and supervised contrastive learning was used for training optimization. The model was validated using data from multiple mine microseismic monitoring projects. The results show that the constructed model performs significantly better than traditional image recognition models in terms of accuracy, recall, and precision. High accuracy is maintained in transfer tests across different mines. Good robustness and generalization ability are also shown. The MSRCNN module is the core source of model performance. When used alone, it achieves recognition accuracy close to that of the complete model, and it also has fewer parameters. Therefore, it is suitable for deployment in real-time mine monitoring systems with limited computing resources. The complete model has more parameters, but it achieves the best recognition performance. It is more suitable for high-risk scenarios, such as deep high-stress areas, rockburst-prone areas, and areas with frequent microseismic triggering. More reliable recognition ability is provides for microseismic early warning.

Key words: multi-scale residual convolutional neural network (MSRCNN), mine microseismic, image recognition, bidirectional long short-term memory network (BiLSTM), self-attention mechanism

中图分类号: