Study on optimal wind speed parameters of construction tunnel under condition of double-channel air supply

doi:10.16265/j.cnki.issn1003-3033.2023.07.1720

Abstract

Abstract:

Aiming at the problems of matching of wind speed and difficulty in measuring the related characteristics of high deposited respirable dust in the double-channel air supply of the construction tunnel, taking a large section railway tunnel under construction as the research background, the return air vector characteristics under different wind speeds were tested. The multi-mode ventilation simulation analysis of the experimental tunnel was carried out by using the two-stage solution mode of ANSYS Fluent. The results show that the parameters in the numerical simulation are set correctly and the results are reliable. When the outlet wind speed V_f of auxiliary pipe is more than 9.5 m/s, the mean value of vector wind speed $\overline{V}_{\lambda}$ on the detection section P_i is negatively correlated with V_f. When V_f ≤ 9.5 m/s, $\overline{V}_{\lambda}$ and V_f are positively correlated. When V_f=9 m/s, the wind speed matching degree of the main and auxiliary air pipes is the best, and class I respirable dust has the highest dust reduction efficiency. Class I respirable dust is easy to gather around the trolley, and Class II respirable dust is more likely to pass through the lower space of the trolley and enter the backlog swirl area under the action of deflected airflow, resulting in long-term cluster aggregation of this type of respirable dust. Under the optimal wind speed matching condition, the impact of the return flow conflict on the swirl region is not obvious, but it still exists. During construction, additional ventilation and dust reduction equipment shall be arranged in the region.

Key words: double-channel air supply, construction tunnel, optimal wind speed, dust evacuation, respirable dust

QIAO Liwei, SANG Conghui, WANG Lieni, ZHAO Yanfa, YUAN Wenchao. Study on optimal wind speed parameters of construction tunnel under condition of double-channel air supply[J]. China Safety Science Journal, 2023, 33(7): 105-112.

Figures/Tables 9

Fig.1

Fig.2

Tab.1

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

References 17

[1]	周刚, 聂文, 程卫民, 等. 煤矿综放工作面高压雾化降尘对粉尘颗粒微观参数影响规律分析[J]. 煤炭学报, 2014, 39(10):2053-2059.
	ZHOU Gang, NIE Wen, CHENG Weimin, et al. Influence regulations analysis of high-pressure atomization dust-settling to dust particle's microscopic parameters in fully mechanized caving coal face[J]. Journal of China Coal Society, 2014, 39(10): 2053-2059.
[2]	CHANG Xiaokai, CHAI Jinrui. Design of effective tunnel ventilation system using computational fluid dynamics[J]. International Journal of Recent Technology and Engineering, 2020, 9(1):722-725.
[3]	任仕国. 白云岩地层特大断面铁路隧道工法比选[J]. 中国安全科学学报, 2019, 29(增2):69-76.
	REN Shiguo. Comparison and selection of construction methods of super large section railway tunnel in dolomite stratum[J]. China Safety Science Journal, 2019, 29 (S2): 69-76. doi: 10.16265/j.cnki.issn1003-3033.2019.S2.012
[4]	刘戎. 螺旋隧道施工区域污染扩散机制及控制技术研究[D]. 重庆: 重庆大学, 2020.
	LIU Rong. Research on pollution diffusion mechanism and control technology in spiral tunnel construction area[D]. Chongqing: Chongqing University, 2020.
[5]	REED W R, BECK T W, ZHENG Y, et al. Foam property tests to evaluate the potential for long wall shield dust control[J]. Mining Engineering, 2018, 70(1):35-41. doi: 10.19150/me.7977
[6]	曹正卯, 刘晓, 牛柏川. 高海拔公路隧道施工期粉尘运移特性研究[J]. 地下空间与工程学报, 2019, 15(3):927-935.
	CAO Zhengmao, LIU Xiao, NIU Baichuan. Migration characteristics of dust during construction stage in highway tunnels at high altitude areas[J]. Chinese Journal of Underground Space and Engineering, 2019, 15 (3): 927-935.
[7]	ZHOU Wenjie, NIE Wen, LIU Xiaofei, et al. Optimization of dust removal performance of ventilation system in tunnel constructed using shield tunneling machine[J]. Building and Environment, 2020, 173.DOI:10.1016/j.buidenv.2020.106745. doi: 10.1016/j.buidenv.2020.106745
[8]	孙闯, 贾宝新, 张涛. 大跨径公路交叉隧道施工安全性研究[J]. 中国安全科学学报, 2015, 25(12):111-115.
	SUN Chuang, JIA Baoxin, ZHANG Tao. Research on surrounding rock stability of large span and small space highway crossing tunnel[J]. China Safety Science Journal, 2015, 25 (12): 111-115.
[9]	李艳强, 吴超, 易斌, 等. 受限空间内粉尘流动的浓度分布模型及其数值模拟[J]. 中国安全科学学报, 2007, 17(10): 50-55.
	LI Yanqiang, WU Chao, YI Bin, et al. Mathematical model and numerical simulation of concentration distribution of dust flowing in limited space[J]. China Safety Science Journal, 2007, 17(10): 50-55.
[10]	岑可法, 樊建人. 工程气固多相流动的理论及计算[M]. 杭州: 浙江大学出版社, 1990: 26-28.
[11]	任玉新, 陈海昕. 计算流体力学基础[M]. 北京: 清华大学出版社, 2006:59-60.
[12]	赵立新, 杨敬源. 工程流体力学[M]. 北京: 化学工业出版社, 2020:32-33.
[13]	乔力伟. 风幕通风方式下施工隧道粉尘浓度场相似模化实验与数值模拟[D]. 成都: 西南交通大学, 2019.
	QIAO Liwei. Similarity modeling experiment and numerical simulation of dust concentration field in construction tunnel under wind curtain ventilation[D]. Chengdu: Southwest Jiaotong University, 2019.
[14]	毕德纯, 程五一. 爆破作业产尘量的计算方法[J]. 煤矿安全, 2001, 32(3):20-22.
[15]	American Conference of Governmental Industrial Hygienists ACGIH. List of threshold limit values of workplace chemicals in 2010[J]. Occupational Health and Emergency Rescue, 2011, 29(6): 287-290.
[16]	MICHALCOVÁ V, KOTRASOVÁ K. The numerical diffusion effect on the CFD simulation accuracy of velocity and temperature field for the application of sustainable architecture methodology[J]. Sustainability, 2020, 12(23): 1-19. doi: 10.3390/su12010001
[17]	张辛亥, 尚治州, 冯振, 等. 大采高综采工作面风流-呼吸带粉尘分布数值模拟[J]. 安全与环境学报, 2021, 21(2):570-575.
	ZHANG Xinhai, SHANG Zhizhou, FENG Zhen, et al. Numerically simulated distribution of the airflow and dust movement in the respiratory zone at the fully mechanized mining face with great mining height[J]. Journal of Safety and Environment, 2021, 21 (2): 570-575.