中国安全科学学报 ›› 2018, Vol. 28 ›› Issue (7): 19-24.doi: 10.16265/j.cnki.issn1003-3033.2018.07.004

• 安全系统学 • 上一篇    下一篇

含有单向环的多向环网络结构及其故障概率计算

崔铁军1,2,3 副教授, 李莎莎1,2, 朱宝艳1 教授   

  1. 1 辽宁工程技术大学 安全科学与工程学院,辽宁 阜新 123000;
    2 矿山热动力灾害与防治教育部重点实验室,辽宁 阜新 123000;
    3 大连交通大学 辽宁省隧道与地下结构工程技术研究中心, 辽宁 大连 116028
  • 收稿日期:2018-04-10 修回日期:2018-05-25 出版日期:2018-07-28 发布日期:2020-11-25
  • 作者简介:崔铁军(1983—),男,辽宁沈阳人,博士,副教授,主要从事系统可靠性及力学系统稳定性等方面的研究。
  • 基金资助:
    国家自然科学基金资助(51704141, 51674127),国家重点研发计划重点专项(2017YFC1503100)。

Multidirectional ring network structure with one-way ring and its fault probability calculation

CUI Tiejun1,2,3, LI Shasha1,2, ZHU Baoyan1   

  1. 1 College of Safety Science and Engineering,Liaoning Technical University,Fuxin Liaoning 123000,China;
    2 Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education,Fuxin Liaoning 123000,China;
    3 Tunnel &Underground Structure Engineering Center of Liaoning,Dalian Jiaotong University,Dalian Liaoning 116028,China
  • Received:2018-04-10 Revised:2018-05-25 Online:2018-07-28 Published:2020-11-25

摘要: 树形拓扑结构是网状拓扑结构的特例,即空间故障树(SFT)是空间故障网络(SFN)的特殊形式。研究更广泛的系统的可靠性与影响因素的关系,将SFT理论中系统结构的树形表示改为网状表示,形成SFN。给出SFN的性质、基本结构及其与SFT转化方法。SFN的结构包括一般网络结构、多向环网络结构及含有单向环的多向环网络结构。由于单向环的特殊性,具有循环连锁发生故障的特征,无法单独构成SFN,因此将其加入多向环网络结构形成含有单向环的多向环网络结构。重点论述含有单向环的多向环网络结构的表示方法和故障概率计算方法。研究结果表明:构建的SFN可处理具有网络结构的故障发生过程,同时SFN可转化为SFT,进而可利用SFT现有理论方法分析故障过程。

关键词: 安全系统工程, 空间故障网络(SFN), 空间故障树(SFT), 单向环结构, 故障概率计算

Abstract: The tree topology is a special case of the network topology,that is,the SFT is a special form of the SFN.In order to study the relationships between system reliability and influencing factors,the tree representation of system structure in SFT theory is changed to network representation and SFN is established.The properties,basic structure of SFN and its transformation method to SFT are given.The SFN structure includes the general network structure,the multidirectional ring network structure and the multidirectional ring network structure with a unidirectional ring.Because of the particularity of unidirectional ring network structure,it has the characteristics of the cycle linkage fault and is unable to form a SFN alone.Therefore,unidirectional ring network structure is added to the multidirectional ring network structure to form a multidirectional ring network structure with a unidirectional ring.This paper focuses on the representation of the multidirectional ring network structure with a unidirectional ring and the method for calculating its fault probability.The results show that the constructed SFN can handle the fault process with network structure,and that SFN can be transformed into SFT,and then the SFT's existing theoretical method is used to complete the fault process analysis.

Key words: safety system engineering, space fault network(SFN), space fault tree(SFT), unidirectional ring structure, fault probability calculation

中图分类号: