中国安全科学学报 ›› 2020, Vol. 30 ›› Issue (5): 60-65.doi: 10.16265/j.cnki.issn1003-3033.2020.05.010

• 安全工程技术 • 上一篇    下一篇

煤岩层静态爆破释能增透机制探讨

郭怀广1,2 助理研究员, 朱立凯2 副研究员   

  1. 1.河南理工大学 安全科学与工程学院,河南 焦作454000;
    2.中国煤炭科工集团沈阳研究院有限公司 煤矿安全技术国家重点实验室,辽宁 沈阳 110016
  • 收稿日期:2020-02-15 修回日期:2020-04-19 出版日期:2020-05-28 发布日期:2021-01-28
  • 作者简介:郭怀广(1985—),男,河南焦作人,博士研究生,助理研究员,主要从事矿井瓦斯防治方面的研究。E-mail:guohuaiguang@yeah.net。
  • 基金资助:
    辽宁省自然科学基金指导计划项目资助 (2019-ZD-0905);国家重点研发计划(2017YFC0804207);河南省基础与前沿技术研究项目(162300410038)。

Research on mechanism of energy release and permeability improvement in coal strata by static blasting

GUO Huaiguang1,2, ZHU Likai2   

  1. 1. School of Safety Science and Engineering, Henan Polytechnic University, Jiaozuo Henan 454000, China;
    2. State Key Laboratory of Coal Mine Safety Technology, Shenyang Research Institute, China Coal Technology & Engineering Group, Shenyang Liaoning 110016, China
  • Received:2020-02-15 Revised:2020-04-19 Online:2020-05-28 Published:2021-01-28

摘要: 针对高应力低透气煤层煤与瓦斯突出频发的问题,建立静态破岩致裂力学模型,数值模拟致裂过程,测试并分析影响致裂效果的致裂时效、膨胀压力、致裂孔布置工艺等相关参数,研究静态爆破释能防突及致裂增透机制。结果表明:配置膨胀剂、抑制剂、水分配比分别为100∶8∶30、100∶12∶30、100∶15∶30,起效时间分别为50、30、100 min的3种破碎剂;其中配比2膨胀效果最好,最大致裂压力为150.8 MPa。破碎剂膨胀稳态持续拉应力大于介质抗拉强度,实现静态爆破功能;控制孔起到裂隙扩展引导和尺寸放大作用。静态爆破降低煤体瓦斯及应力潜能积聚,增加煤体裂隙数量,达到静态爆破释能增透目的。

关键词: 煤与瓦斯突出, 静态爆破, 释能增透, 断裂力学, 致裂时效

Abstract: In order to address the problem of frequent coal and gas outburst in high-stress and low-permeability coal seams, a static rock fracturing mechanical model was set up, and process of fracturing was numerically simulated. Then, relevant parameters of crack timeliness, inflation pressure, layout of crack hole that affect fracturing effect were tested and analyzed, and research was carried out on mechanism of energy release and outburst prevention as well as permeability improvement by static blasting. The results show that ratio of swelling agent, inhibitor and water is 100∶8∶30, 100∶12∶30 and 100∶15∶30, and their onset time is 50, 30 and 100 min respectively. Among them ratio 2 has best expansion effect with maximum crack pressure of 150.8 MPa. Static blasting works as continuous tensile stress of cracking agent is greater than tensile strength of medium. Control holes can guide expansion of crack and enlarge its size. Moreover, static blasting can reduce accumulation of gas and stress potential and increase number of cracks in coal body, thus achieving purpose of energy release and permeability improvement through static blasting.

Key words: coal and gas outburst, static blasting, energy release and permeability improvement, fracture mechanics, crack timeliness

中图分类号: