[1] 吴越, 韩健, 刘佳,等. 高速列车车轮多边形磨耗对轮轨力和转向架振动行为的影响[J]. 机械工程学报, 2018, 54(4):37-46. WU Yue, HAN Jian, LIU Jia, et al. Effect of high-speed train polygonal wheels on wheel/rail contact force and bogie vibration[J]. Journal of Mechanical Engineering, 2018, 54(4):37-46. [2] 李磊,施继忠,张小强.地铁车辆故障模式危害度评估方法研究[J].中国安全科学学报,2018,28(5):43-48. LI Lei, SHI Jizhong, ZHANG Xiaoqiang. Research on method of evaluating harmfulness of metro vehicle failure mode[J].China Safety Science Journal, 2018, 28(5):43-48. [3] 陈光雄, 金学松, 邬平波, 等. 车轮多边形磨耗机理的有限元研究[J]. 铁道学报, 2011, 33(1):14-18. CHEN Guangxiong, JIN Xuesong, WU Pingbo, et al.Finite element study on the generation mechanism of polygonal wear of railway wheels[J]. Journal of the China Railway Society, 2011, 33(1):14-18. [4] 杨皓杰. 地铁列车曲线碰撞响应及耐撞性研究[D].成都:西南交通大学,2018 YANG Haojie. Study on curve collision response and crashworthiness of subway trains[D]. Chengdu: Southwest Jiaotong University, 2018. [5] INGO K, POPP K. System dynamics and long-term behaviour of railway vehicles, track and subgrade [M]. Berlin: Springer-Verlag, 2003: 101-120. [6] POPP K, KAISER I, KRUSE H. System dynamics of railway vehicles and track[J]. Archive of Applied Mechanics, 2003, 72(11/12): 949-961. [7] 王志臣,宋颖,杜彦良.基于仿真的铁路车轮不圆度安全限值研究[J].石家庄铁道大学学报:自然科学版,2014,27(2):61-65. WANG Zhichen, SONG Ying, DU Yanliang. Safety management of out-of-round wheel profiles of high-speed railway based on adams/rail simulation[J].Journal of Shijiangzhuang Tiedao University: Natural Science,2014,27(2):61-65. [8] 王宇. 车轮失圆激扰下的轮轨动力响应分析[D].成都: 西南交通大学,2015. WANG Yu. Study on influence of out-of-round railway wheels on wheel/rail interaction force[D]. Chengdu:Southwest Jiaotong University, 2015. [9] 尹振坤,吴越,韩健.高速列车车轮多边形磨耗对轮轨垂向力的影响[J].铁道学报,2017,39(10):26-32. YIN Zhenkun, WU Yue, HAN Jian. Effect of polygonal wear of high-speed train wheels on vertical force between wheel and rail[J].Journal of the China Railway Society,2017,39(10):26-32. [10] LI Ling, XIAO Xinbiao, JIN Xuesong, et al. Interaction of subway LIM vehicle with ballasted track in polygonal wheel wear development[J]. Acta Mechanica Sinica:English Series, 2011, 27(2):297-307. [11] 王平,张荣鹤,陈嘉胤,等.高速铁路列车车轮多边形化对道岔区动力学性能的影响[J].机械工程学报,2018,54(4):47-56. WANG Ping, ZHANG Ronghe, CHEN Jiayin, et al.Influence of polygonal wheels in high-speed trains on dynamic performance of turnout[J]. Journal of Mechanical Engineering,2018,54(4):47-56. [12] LIU Wei, MA Weihua, LUO Shihui, et al. Research on influence of wheel vibration and wheel polygonization on wheel-rail force in consideration of wheelset elasticity[J]. Journal of the China Railway Society, 2013, 35(6):28-34. [13] JIN Xuesong, WU Lei, FANG Jianying, et al. An investigation into the mechanism of the polygonal wear of metro train wheels and its effect on the dynamic behaviour of a wheel/rail system[J]. Vehicle System Dynamics, 2012, 50(12):1 817-1 834. [14] 方翁武, 刘韦, 罗世辉, 等. 轮对多边形化对车辆动力学性能的影响[J]. 机车电传动, 2013(4):59-62. FANG Wengwu, LIU Wei, LUO Shihui, et al.Influence of wheel polygonization on vehicles dynamics[J]. Electric Drive Locomotives, 2013(4):59-62. [15] GB 50157—2013,地铁设计规范 [S]. GB 50157-2013,Code for design of metro[S]. [16] GB/T 5599—1985, 铁道车辆动力学性能评定和试验鉴定规范[S]. GB/T 5599-1985, Railway vehicle-specification for evalution the dynamic performance and accreditation test[S]. [17] 李伟, 李言义, 张雄飞, 等. 地铁车辆车轮多边形的机理分析[J]. 机械工程学报, 2013, 49(18):17-22. LI Wei, LI Yanyi, ZHANG Xiongfei, et al.Mechanism of the polygonal wear of metro train wheels[J]. Journal of Mechanical Engineering, 2013, 49(18):17-22. |