[1] ECKHOFF R K. Current status and expected future trends in dust explosion research[J].Journal of Loss Prevention in the Process Industries, 2005,18(4/5/6): 225-237. [2] TAVEAU J, HOCHGREB S, LEMKOWITZ S, et al. Explosion hazards of aluminum finishing operations[J]. Journal of Loss Prevention in the Process Industries, 2018, 51: 84-93. [3] GB12476. 1—2000,可燃性粉尘环境用电气设备-第1部分:用外壳和限制表面温度保护的电气设备 第1节:电气设备的技术要求[S]. GB12476. 1-2000,Electrical apparatus for use in the presence of combustible dust-part 1-1: electrical apparatus protected by enclosures and surface temperature limitation-specification for apparatus[S]. [4] 邓煦帆. 粉尘爆炸危险性分级研究[J]. 防爆电机, 1992(1): 14-21. DENG Xufan. Classification of combustion dust explosion hazard[J]. Explosion-Proof Electric Machine, 1992(1): 14-21. [5] MARMO L, CAVALLERO D, DEBERNARDI M L. Aluminium dust explosion risk analysis in metal workings[J]. Journal of Loss Prevention in the Process Industries, 2004, 17(6): 449-465. [6] LI Gang, YUAN Chunmiao, ZHANG Peihong, et al. Experiment-based fire and explosion risk analysis for powdered magnesium production methods[J]. Journal of Loss Prevention in the Process Industries, 2008,21(4): 461-465. [7] 胡东涛, 陈先锋, 陈曦. 不同粒径铝粉火焰传播特性试验研究[J].中国安全科学学报,2016,26(8): 41-45 HU Dongtao, CHEN Xianfeng, CHEN Xi. Experimental study on aluminum dust flame propagation characteristics [J]. China Safety Science Journal, 2016,26(8): 41-45. [8] LOMBA R, BERNARD S, GILLARD P, et al. Comparison of combustion characteristics of magnesium and aluminum powders[J]. Combustion Science and Technology, 2016, 188(11/12): 1 857-1 877. [9] 钟圣俊,苗楠,刘洪洋. 铝镁金属抛光工艺粉尘爆炸事故分析与防护[J]. 现代职业安全,2014(10): 26-29. [10] DANZI E, TOMASSO A D, RICCIO D, et al. A speditive explosibility test for dusts[C]. Proceedings of the 11th International Symposium on Hazrds, Prevention, and Mitigation of Industrial Explosions, 2016: 239-249. [11] MARMO L, RICCIO D, DANZI E. Explosibility of metallic waste dusts[J]. Process Safety & Environmental Protection, 2017, 107: 69-80. [12] ECKHOFF R K. Dust explosions in the process industries (Third Edition)[M]. New York: Gulf Professional Publishing,2003: 488-490. [13] UNI. EN 13821,Potentially explosive atmospheres--explosion prevention and protection-determination of minimum ignition energy of dust/air mixtures[S]. 2004. [14] ASTM E1226-12a, Standard test method for explosiblity of dust clouds[S]. 2012. [15] ISO/IEC 80079-20-2, Explosive atmospheres part 20-2: material characteristics--combustible dusts test methods[S]. 2016. [16] OSHA Combustible Dust NEP, OSHA instruction--directive number: CPL 03-00-008, combustible dust national emphasis program (reissued)[S]. 2008. [17] UNI. EN 14034-1, Determination of explosion characteristics of dust clouds--part 1: determination of the maximum explosion pressure Pmax of dust clouds[S].2001. [18] ATKINSON A. Transport processes during the growth of oxide flim at elevated temperature[J]. Review of Modern Physics,1985,57(2): 437-470. [19] TIAN Yaoqi, LI Yin, XU Xueming, et al. Starch retrogradation studied by thermogravimetric analysis (TGA)[J]. Carbohydrate Polymers, 2011, 84(3): 1 165-1 168.
|