中国安全科学学报 ›› 2021, Vol. 31 ›› Issue (8): 147-154.doi: 10.16265/j.cnki.issn1003-3033.2021.08.021

• 公共安全 • 上一篇    下一篇

大跨度钢结构施工安全风险评价IHFACS-BN模型及应用*

胡韫频1 副教授, 李超1**, 李宗亮1, 杨道合2   

  1. 1 武汉理工大学 土木工程与建筑学院,湖北 武汉430070;
    2 武汉市建设工程安全监督站,湖北 武汉 430015
  • 收稿日期:2021-05-17 修回日期:2021-07-07 出版日期:2021-08-28 发布日期:2022-02-28
  • 通讯作者: ** 李 超(1997—),男,湖北黄冈人,硕士研究生,研究方向为工程项目管理。E-mail:2329581350@qq.com。
  • 作者简介:胡韫频 (1968—),女,湖北汉川人,博士,副教授,硕士生导师,主要从事工程项目管理方面的研究。E-mail:t_hyp@163.com。
  • 基金资助:
    武汉市城建局科技计划项目(201935)。

IHFACS-BN safety assessment model for large-span steel structure construction and its application

HU Yunpin1, LI Chao1, LI Zongliang1, YANG Daohe2   

  1. 1 School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan Hubei 430070, China;
    2 Wuhan Construction Safety Management Office, Wuhan Hubei 430015, China
  • Received:2021-05-17 Revised:2021-07-07 Online:2021-08-28 Published:2022-02-28

摘要: 为降低大跨度钢结构施工安全事故发生率,提出基于改进人为因素分析及分类系统(IHFACS)与贝叶斯网络(BN)的大跨度钢结构施工安全风险评价模型。首先,引入HFACS方法,结合工程实际改进HFACS法;然后,基于IHFACS全面识别施工安全风险,采用粗糙集(RS)方法构建评价指标体系;其次,构建BN模型,并根据现场数据结合模糊集方法确定BN各根节点的先验概率及节点间的条件概率分布,通过GeNIe软件计算系统失效概率,分析关键风险因素;最后,以昆明机场扩建工程为例,验证该模型的有效性。结果表明:模型计算结果与实际情况基本符合,此工程总体安全风险概率为57.62%;焊缝错边、气孔、夹渣与支撑胎架拆除不当的敏感度均超过20%,是大跨度钢结构施工应重点管控的关键风险因素。

关键词: 大跨度钢结构, 施工安全风险, 改进人为因素分析及分类系统(IHFACS), 贝叶斯网络(BN), 粗糙集(RS), 模糊集

Abstract: In order to reduce construction accidents of long-span steel structures, a risk evaluation model for them based on IHFACS and BN was proposed. Firstly, HFACS method was introduced and improved based on engineering practice. Secondly, safety risks were comprehensively identified by using IHFACS, and an evaluation index system was constructed by adopting RS method. Then, according to field data and fuzzy set method, prior probability of each BN root node and conditional probability distribution between nodes were determined, the system's failure probability was calculated by GeNIe software, and key risk factors were analyzed. Finally, with Kunming airport expansion project as an example, the model's effectiveness and advantages were verified. The results show that its calculated outcomes are basically consistent with reality, and the overall safety risk probability of the project is 57.62%. It is also found that misalignment of welds, pores, slag inclusion and improper removal of supporting tire frames all feature a susceptibility above 20%, and they make the key risk factors in large-span steel structure construction.

Key words: Long-span steel structure, construction safety risk, improved human factor analysis and classification system (IHFACS), Bayesian network(BN), rough set(RS), fuzzy set

中图分类号: