China Safety Science Journal ›› 2017, Vol. 27 ›› Issue (9): 140-145.doi: 10.16265/j.cnki.issn1003-3033.2017.09.024

• Safety Science of Engineering and Technology • Previous Articles     Next Articles

Study on mechanism of deep-hole controlled blasting in coal seam

ZHANG Shuchuan, ZHU Feihao, GAO Kui   

  1. 1 College of Energy and Safety,Anhui University of Science and Technology,Huainan Anhui 232001, China
    2 Key Laboratory of Mine Safety and High Efficient Mining Jointly Built by Province and Education Ministry, Anhui University of Science and Technology, Huainan Anhui 232001, China
  • Received:2017-06-20 Revised:2017-08-13 Online:2017-09-20 Published:2020-11-16

Abstract: In order to prevent and control coal gas outburst and other gas disaster accidents by using the deep-hole controlled blasting technology, the mechanism of the deep-hole controlled blasting technology was studied by means of numerical analyses, laboratory tests and theoretical analyses. Both blasting with control hole and blasting without control hole were simulated numerically by using 3D numerical analysis software ANSYS/LS-DYNA and physically. Incidence and reflection of stress wave at control hole were analyzed theoretically. The results show that the control hole reflects the incident compressive stress wave into a tensile stress wave and produces a tensile action, the control effect is obvious and the inhibition effect on the fracture development in other directions is obvious.

Key words: deep-hole controlled blasting, control hole, mechanism, numerical simulation, explosion stress wave

CLC Number: