[1] |
张志宇, 朱能. 16个高温高湿环境工况等级划分[J]. 中国安全科学学报, 2020, 30(5): 184-190.
doi: 10.16265/j.cnki.issn1003-3033.2020.05.028
|
|
ZHANG Zhiyu, ZHU Neng. Classification of 16 high temperature and high humidity environmental conditions[J]. China Safety Science Journal, 2020, 30(5): 184-190.
doi: 10.16265/j.cnki.issn1003-3033.2020.05.028
|
[2] |
YOU Bo, WANG Siqi, YANG Ming, et al. Simulation study of heat transfer in the space under the clothing of mining ventilation suits in typical human labour positions[J]. International Journal of Thermal Sciences, 2025, 208: DOI: 10.1016/j.ijthermalsci.2024.109423.
|
[3] |
王梦飞, 金龙哲, 于露, 等. PPG信号用于高温高湿伤害预警的可行性研究[J]. 中南大学学报:自然科学版, 2020, 51(5): 1424-1430.
|
|
WANG Mengfei, JIN Longzhe, YU Lu, et al. Feasibility study of PPG signal for early warning of high temperature and high humidity injury[J]. Journal of Central South University: Science and Technology, 2020, 51(5): 1424-1430.
|
[4] |
ISO 7933-2004, Ergonomics of the thermal environment-analytical determination and interpretation of heat stress using calculation of the predicted heat strain[S].
|
[5] |
FIALA D, HAVENITH G. Modelling human heattransfer and temperature regulation[M]. Cham: Springer International Publishing, 2015:265-302.
|
[6] |
JOSHI A, WANG Faming, KANG Zhanxiao, et al. A three-dimensional thermoregulatory model for predicting human thermophysiological responses in various thermal environments[J]. Building and Environment, 2022, 207: DOI: 10.1016/j.buildenv.2021.108506.
|
[7] |
OPRICOVIC S, TZENG G H. Compromise solution by MCDM methods: a comparative analysis of VIKOR and TOPSIS[J]. European Journal of Operational Research, 2004, 156(2): 445-455.
|
[8] |
YADAV R, SINGH M, MEENA A, et al. Selection and ranking of dental restorative composite materials using hybrid Entropy-VIKOR method: an application of MCDM technique[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2023, 147: DOI: 10.1016/J.JMBBM.2023.106103.
|
[9] |
KUMAR A, KUMAR M, VERMA P C. Ranking analysis of AA7075-Cr alloy composites based on physical, mechanical, and sliding wear assessment using hybrid ENTROPY-VIKOR approach[J]. International Journal of Metalcasting, 2024, 18(1): 352-372.
|
[10] |
THOM C E. The discomfort index[J]. Weatherwise, 2010, 12(2): 57-61.
|
[11] |
MORAN D S, PANDOLF K B, SHAPIRO Y, et al. An environmental stress index (ESI) as a substitute for the wet bulb globe temperature (WBGT)[J]. Journal of Thermal Biology, 2001, 26(4/5): 427-431.
|
[12] |
胡琴. 基于热平衡理论的人体热应激水平评估[D]. 武汉: 武汉理工大学, 2017.
|
|
HU Qin. Evaluation of human heat stress level based on heat balance theory[D]. Wuhan: Wuhan University of Technology, 2017.
|
[13] |
KURAZUMI Y, TSUCHIKAWA T, MATSUBARA N, et al. Evaluation of enhanced conduction-corrected modified effective temperature ETFe as the outdoor thermal environment evaluation index[J]. Energy and Buildings, 2011, 43: 2926-2938.
|
[14] |
SAKOI T, MOCHIDA T. Concept of the equivalent wet bulb globe temperature index for indicating safe thermal occupational environments[J]. Building Science, 2013, 67: 167-178.
|
[15] |
CHEN Y C, MATZARAKIS A. Modified physiologically equivalent temperature:basics and applications for western European climate[J]. Theoretical and Applied Climatology, 2018, 132: 1275-1289.
|
[16] |
ZHENG Guozhong, LI Cong, FENG Yinshuai. Developing a new index for evaluating physiological safety in high temperature weather based on entropy-TOPSIS model: a case of sanitation worker[J]. Environmental Research, 2020, 191(8): DOI: 10.1016/j.envres.2020.110091.
|
[17] |
吕石磊. 极端热环境下人体热耐受力研究[D]. 天津: 天津大学, 2007.
|
|
LYU Shilei. Study on human thermal tolerance under extreme thermal environment[D]. Tianjin: Tianjin University, 2007.
|
[18] |
YOU Bo, WU Chao, LI Ji, et al. Physiological responses of people in working faces of deep underground mines[J]. International Journal of Mining Science and Technology, 2014, 24(5): 683-688.
|
[19] |
YANG Bin, YAO Huangcheng, YANG Pengfei, et al. Effects of thermal and acoustic environments on workers' psychological and physiological stress in deep underground spaces[J]. Building and Environment, 2022, 212: DOI: 10.1016/J.BUILDENV.2022.108830.
|