中国安全科学学报 ›› 2023, Vol. 33 ›› Issue (12): 85-91.doi: 10.16265/j.cnki.issn1003-3033.2023.12.0354

• 安全工程技术 • 上一篇    下一篇

瓦斯抽采钻孔封孔作业风险辨识与评估

李宏1(), 马金魁2,3, 田坤云1, 杨皓4   

  1. 1 河南工程学院 资源与安全工程学院,河南 郑州 451191
    2 中煤科工集团 沈阳研究院有限公司,辽宁 抚顺 113122
    3 煤矿安全技术国家重点实验室,辽宁 抚顺 113122
    4 窑街煤电集团有限公司 三矿,甘肃 兰州 730010
  • 收稿日期:2023-06-17 修回日期:2023-09-22 出版日期:2023-12-28
  • 作者简介:

    李宏 (1982—),男,河南新县人,博士,高级工程师,主要从事煤矿瓦斯防治科研及教学工作。E-mail:

    马金魁,副研究员

    田坤云,教授

    杨皓,工程师

  • 基金资助:
    河南工程学院博士培育基金资助(D2022023); 河南省高校科技创新团队支持计划项目(22IRTSTHN009)

Risk identification and assessment for gas extraction drilling sealing operations

LI Hong1(), MA Jinkui2,3, TIAN Kunyun1, YANG Hao4   

  1. 1 School of Resources and Safety Engineering, Henan University of Engineering, Zhengzhou Henan 451191, China
    2 China Coal Technology & Engineering Group Shenyang Research Institute, Fushun Liaoning 113122, China
    3 State Key Laboratory of Coal Mine Safety Technology, Fushun Liaoning 113122, China
    4 No.3 Mine of Yaojie Coal and Electricity Group Corporation, Lanzhou Gansu 730010, China
  • Received:2023-06-17 Revised:2023-09-22 Published:2023-12-28

摘要:

为有效提高新型封孔材料封孔作业的安全性,采用作业条件危险性分析的安全风险辨识方法,辨识封孔作业过程中的危险源;采用安全风险评估指标体系,将封孔作业细分为7个一级风险因素指标及34个二级风险因素指标;定量计算各指标因素的关联度及危险程度;采用安全检查表法检查封孔作业整个过程的“人-机-环-管”系统安全。研究结果表明:压风管路崩裂、顶板冒落、风动搅拌桶扇叶、新型材料腐蚀及注浆出料口堵塞憋压是钻孔封孔作业重点管控的风险因素;采用安全检查表法可全面筛查封孔作业前、作业中和作业后的风险。

关键词: 瓦斯抽采, 封孔作业, 风险辨识, 风险评估, 辨识方法, 安全检查表

Abstract:

In order to effectively improve the safety of sealing operation of new sealing material, the safety risk identification method of hazard analysis of operating conditions was adopted to identify the danger sources in sealing operation. The safety risk assessment index system method was adopted to subdivide the sealing operation into 7 first-level risk factor indexes and 34 second-level risk factor indexes. The correlative and dangerous degree of each index factor was quantitatively calculated. The safety checklist method was adopted to check the safety of "human-machine-environment-management" system during the whole process of sealing operation. The safety checklist method was used to check the safety of the "human-machine-environment-management" system in the whole process of the operation. The research results show that cracking of pressurized air pipeline, falling roof plate, fan blade of air-driven mixing drum, corrosion of new materials and blockage of grouting outlet to hold the pressure are the risk factors that are important to be controlled in the drilling and sealing operation. The safety checklist method can be used to comprehensively screen the risks before, during and after sealing operations.

Key words: gas extraction, sealing operations, risk identification, risk assessment, identification methods, safety checklist