破碎站大块物料安全通过能力影响因素分析

doi:10.16265/j.cnki.issn1003-3033.2023.S2.0017

摘要/Abstract

摘要：

为提高物料破碎效率,解决露天矿破碎站大块物料导致的卡料堵塞问题,建立散体物料模型和物料粒度数学模型。首先,分析物料所受破碎力影响因素,建立不同因素作用下破碎力的数学模型;然后,以CR610/14-35型双齿辊破碎机为例,对不同齿辊中心距和齿高下不同物料的受力进行数值模拟。结果表明:物料粒度、齿辊中心距以及齿辊齿高是影响破碎站大块物料通过能力的主要因素;物料所受切向力随齿辊中心距增加而减小,随齿辊齿高增加而增大。

关键词: 双齿辊破碎机, 物料粒度, 切向力, 中心距, 齿高

Abstract:

In order to improve the efficiency of material crushing and solve large material jamming in open-pit mine crushing stations, the bulk material model and the mathematical model of material particle size were established. Firstly, the factors affecting the crushing force of the material were analyzed, and the mathematical models of crushing force under the action of different factors were established. Then, the CR610/14-35 double-toothed roller crusher was taken as an example, and the force of different materials under different center distances and tooth heights of the toothed roller was numerically simulated. The results show that the particle size, the center distance, and the tooth height of the toothed roller are the main factors affecting the passing capacity of large materials in the crushing station, and the tangential force of the material decreases with the increase in the center distance of the toothed roller and increases with the increase in the tooth height of the toothed roller.

Key words: double-toothed roller crusher, material particle size, tangential force, center distance, tooth height

中图分类号:

X936

杜志勇. 破碎站大块物料安全通过能力影响因素分析[J]. 中国安全科学学报, 2023, 33(S2): 111-115.

DU Zhiyong. Analysis of influencing factors of safe passing capacity of large materials in crushing station[J]. China Safety Science Journal, 2023, 33(S2): 111-115.

图/表 7

图1

图2

图3

图4

图5

图6

图7

参考文献 16

[1]	武建强, 李永亮. 大型露天矿用旋回式半移动破碎站创新设计[J]. 中国重型装备, 2023(3):1-5.
	WU Jianqiang, LI Yongliang. Innovative design of gyratory semi-mobile crushing plant for large-scale open-pit mines[J]. China Heavy Equipment, 2023(3):1-5.
[2]	尹新伟, 胡月龙, 杨学鹏, 等. 双齿辊破碎机的破碎力离散元模拟研究[J]. 煤炭科学技术, 2020, 48(6):154-161.
	YIN Xinwei, HU Yuelong, YANG Xuepeng, et al. Discrete element simulation study of crushing force of double tooth roller crusher[J]. Coal Science and Technology, 2020, 48(6):154-161.
[3]	CLEARlY P W, SINNOTT M D. Simulation of particle flows and breakage in crushers using dem: part 1-compression crushers[J]. Minerals Engineering, 2015,74:178-197.
[4]	鲁艳鹏. 基于DEM-FEM耦合的双齿辊破碎机及其传动系统的数字化平台研究[D]. 长春: 吉林大学, 2019.
	LU Yanpeng. Research on digital platform of double tooth roller crusher and its drive system based on dem-fem coupling[D]. Changchun: Jilin University, 2019.
[5]	李敏. 矿用双齿辊破碎机试验机的设计研发[D]. 济南: 山东大学, 2021.
	LI Min. Design and development of mining double tooth roll crusher testing machine[D]. Jinan: Shandong University, 2021.
[6]	刘煜. 露天矿破碎站协同调速破碎技术研究与应用[D]. 北京: 中国矿业大学(北京), 2018.
	LIU Yu. Research and application of collaborative speed regulation crushing technology for open-pit mine crushing stations[D]. Beijing: China University of Mining and Technology (Beijing), 2018.
[7]	孙魁元. 雷达料位监测技术在神宝能源公司一级破碎站的应用[J]. 露天采矿技术, 2018, 33(5):86-88, 91.
	SUN Kuiyuan. Application of radar level monitoring technology in the first-level crushing plant of Shenbao Energy Company[J]. Surface Mining Technology, 2018, 33(5):86-88, 91.
[8]	张瑞新, 刘煜, 郑群飞, 等. 基于EDEM的双齿辊破碎机破碎效率影响因素仿真分析[J]. 金属矿山, 2018(2):154-159.
	ZHANG Ruixin, LIU Yu, ZHENG Qunfei, et al. Simulation analysis of influencing factors of crushing efficiency of double-tooth roller crusher based on edem[J]. Metal Mine, 2018(2):154-159.
[9]	GUAN Wei, WANG Shuai, CHEN Zeren, et al. An automatic alignment method for discharge arm of mobile crushing station based on binocular vision and fuzzy control[J]. Transactions of the Institute of Measurement and Control, 2022, 45:1001-1 020.
[10]	鞠兴军, 张周爱, 智晓峰, 等. 露天煤矿半连续工艺系统关键设备选型设计方法[J]. 煤炭工程, 2021, 53(11):21-25.
	JU Xingjun, ZHANG Zhouai, ZHI Xiaofeng, et al. Selection and design method of key equipment of semi-continuous process system in open-pit coal mine[J]. Coal Engineering, 2021, 53(11):21-25.
[11]	袁嘉勋. 废钢双齿辊破碎机动态分析及优化[D]. 唐山: 华北理工大学, 2021.
	YUAN Jiaxun. Dynamic analysis and optimization of scrap steel double toothed roller crusher[D]. Tangshan: North China University of Technology, 2021.
[12]	李鹏飞, 刘启蒙, 陈秀艳. 影响断层活化的破碎带特征参数敏感性分析[J]. 中国安全生产科学技术, 2017, 13(5):16-20.
	LI Pengfei, LIU Qimeng, CHEN Xiuyan. Sensitivity analysis of characteristic parameters of fracture zone affecting fault activation[J]. China Safety Science and Technology, 2017, 13(5):16-20.
[13]	李铭杰, 卢守青, 司书芳, 等. 粒径损伤对原生煤和构造煤孔隙结构与分形特征的影响[J]. 中国安全生产科学技术, 2022, 18(7):88-94.
	LI Mingjie, LU Shouqing, SI Shufang, et al. Effects of particle size damage on pore structure and fractal characteristics of primary coal and structural coal[J]. China Safety Science and Technology, 2022, 18(7):88-94.
[14]	郝传波, 张睿, 成乾龙, 等. 破碎煤体再造矩形通道受力分析[J]. 中国安全生产科学技术, 2018, 14(12):114-118.
	HAO Chuanbo, ZHANG Rui, CHENG Qianlong, et al. Force analysis of rectangular channel for crushed coal reconstruction[J]. China Safety Science and Technology, 2018, 14(12):114-118.
[15]	GRNDAHL A, ASBJRNSSON G, HULTNEN E, et al. Diagnostics of cone crusher feed segregation using power draw measurements - ScienceDirect[J]. Minerals Engineering, 2018, 127:15-21. doi: 10.1016/j.mineng.2018.07.008
[16]	潘伟桥. 基于离散元法的圆锥破碎机破碎特性研究及腔型优化[D]. 太原: 太原科技大学, 2020.
	PAN Weiqiao. Study on crushing characteristics and cavity optimization of cone crusher based on discrete element method[D]. Taiyuan: Taiyuan University of Science and Technology, 2020.